No products
SAE There are 12923 products.
-
SAE AS1985D
SAE AS1985D FITTING,ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO FLARED TUBE END standard by SAE International, 07/12/2011
$31.20 $78.00 -60%In Stock -
SAE AS6120
SAE AS6120 FITTING ASSEMBLY, ELBOW, 45° AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI standard by SAE International, 07/12/2011
$31.20 $78.00 -60%In Stock -
SAE AS 6449
SAE AS 6449 Solid Film Lubricant for Fluid Fittings in Oxygen, Potable Water, Hydraulic, and Other Systems standard by SAE International, 07/12/2011
$31.20 $78.00 -60%In Stock -
SAE AS6123
SAE AS6123 FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON THE BRANCH, HYDRAULIC, UP TO 1500 PSI standard by SAE International, 07/12/2011
$31.20 $78.00 -60%In Stock -
SAE AS4984A
SAE AS4984A Coating Requirements for Aerospace Hand Tools standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6948
SAE AMS6948 Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes, 4Al - 2.5V - 1.5Fe, Annealed standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6947
SAE AMS6947 Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes, 4Al - 2.5V - 1.5Fe, Annealed, Heat Treatable standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6907A
SAE AMS6907A Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, Duplex Annealed standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6905A
SAE AMS6905A Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo, Duplex Annealed standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6516
SAE AMS6516 Steel, Bars and Forgings 1Cr 10Ni 7Co 2Mo 1.3W 0.1V (0.28 - 0.32C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized and Annealed Precipitation Hardenable standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock -
SAE AMSC26074C [...
SAE AMSC26074C [ Withdrawn ] Electroless Nickel Coatings (Cancelled: Jul 2011) standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock -
SAE AMS4617
SAE AMS4617 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged standard by SAE International, 07/08/2011
$31.20 $78.00 -60%In Stock
