No products
SAE There are 12923 products.
-
SAE AS4786A
SAE AS4786A Driver Drills, Battery Powered standard by SAE International, 03/30/2011
$31.20 $78.00 -60%In Stock -
SAE AS6146
SAE AS6146 NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286 standard by SAE International, 03/29/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6517
SAE AMS6517 Steel, Bars, and Forgings, 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 - 0.17C) Double Vacuum Melted, Normalized, Annealed standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6439D
SAE AMS6439D Steel Sheet, Strip, and Plate, 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC), Consumable Electrode Vacuum Melted, Annealed standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMS6437H
SAE AMS6437H Steel, Sheet, Strip, and Plate, 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMS4375L
SAE AMS4375L Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMS4284J
SAE AMS4284J Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMS4982E
SAE AMS4982E Titanium Alloy Wire, 44.5 Cb standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMS2355K
SAE AMS2355K Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Rings standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMSS8802C
SAE AMSS8802C Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMSWWT700/6B
SAE AMSWWT700/6B Tube, Aluminum Alloy, Drawn, Seamless, 6061 standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock -
SAE AMS2248G
SAE AMS2248G Chemical Check Analysis Limits, Corrosion and Heat-Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys standard by SAE International, 03/28/2011
$31.20 $78.00 -60%In Stock
