SAE AMS2642D Structural Examination of Titanium Alloys, Etch-Anodize Inspection Procedure standard by SAE International, 10/18/2010
SAE AMS5545F Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni â 19Cr â 11Co â 9.8Mo â 3.2Ti â 1.5Al â 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable standard by SAE International, 10/18/2010
SAE AMS5576K Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated standard by SAE International, 10/18/2010
SAE AMS4937C Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 6V - 2Sn, Beta Extruded Plus Annealed, Heat Treatable standard by SAE International, 10/18/2010
SAE AMS4900N Titanium Sheet, Strip, and Plate, Commercially Pure, Annealed, 55 ksi (379 MPa) Yield Strength standard by SAE International, 10/18/2010
SAE AMS2431C Peening Media General Requirements standard by SAE International, 10/18/2010
SAE AMS4174D Aluminum Alloy, Flash Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated standard by SAE International, 10/18/2010
SAE AMS2417H Plating, Zinc-Nickel Alloy standard by SAE International, 10/18/2010
SAE AMS5930A Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted standard by SAE International, 10/18/2010
SAE AS39029/27A Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 12 (For MIL-C-38999 Series II Connectors) standard by SAE International, 10/14/2010
SAE AS39029/28A Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, Size 12 (For MIL-C-38999 Series I, II, III and IV Connectors) standard by SAE International, 10/14/2010
SAE AIR1059C Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling and Marking standard by SAE International, 10/14/2010