SAE AMS4004E Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain Hardened (Stabilized: Dec 2015) standard by SAE International, 12/03/2015
SAE AS33699B INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 7 (FOR AS81703 CONNECTORS) standard by SAE International, 12/03/2015
SAE AS22520/10 CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COAXIAL, TWINAXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS standard by SAE International, 12/03/2015
SAE AS33701B INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 19 (FOR AS81703 CONNECTORS) standard by SAE International, 12/03/2015
SAE AS33702B INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 27 (FOR AS81703 CONNECTORS) standard by SAE International, 12/03/2015
SAE AS6449B Solid Film Lubricant for Fluid Fittings in Oxygen, Potable Water, Hydraulic, and Other Systems standard by SAE International, 12/03/2015
SAE AMS5889C Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed standard by SAE International, 12/02/2015
SAE AMS4772K Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range standard by SAE International, 12/03/2015
SAE AS85485/5A CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY ABSORPTIVE, 150 °C, 600-VOLT standard by SAE International, 12/02/2015
SAE AMS2759/3F Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts standard by SAE International, 12/02/2015
SAE AMS3092A Release Agent, for Use During Form-In-Place Gasket Preparation standard by SAE International, 12/02/2015
SAE AMS3265E Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C) standard by SAE International, 12/02/2015