SAE AMS4855G Leaded Red Brass, Sand and Centrifugal Castings 85Cu â 5.0Sn â 5.0Pb â 5.0Zn As Cast standard by SAE International, 09/24/2015
SAE AMS4590C Extrusions, Nickel-Aluminum Bronze, Martensitic 78.5Cu â 10.5Al â 5.1Ni â 4.8Fe Quenched and Tempered (TQ50) standard by SAE International, 09/24/2015
SAE AMS4860F Manganese Bronze, Sand and Centrifugal Castings 58Cu â 39Zn â 1.2Fe â 1.0Al â 0.80Mn As Cast standard by SAE International, 09/24/2015
SAE AS3554B NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, REDUCED HEIGHT 180 KSI, 1400 °F, UNS N07001 standard by SAE International, 09/21/2015
SAE AS20253B PIN, HINGE CORROSION RESISTANT STEEL UNS S30200, UNS S30400, OR UNS S31600 standard by SAE International, 09/21/2015
SAE AMS4077H Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-O) Annealed standard by SAE International, 09/21/2015
SAE AIR5005A Aerospace - Commercial Aircraft Hydraulic Systems standard by SAE International, 09/21/2015
SAE AMS6460G Wire, Steel Welding 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) (Stabilized: Sep 2015) standard by SAE International, 09/16/2015
SAE AMS5034B Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) (Stabilized: Sep 2015) standard by SAE International, 09/16/2015
SAE AMSWWT700/6C Tube, Aluminum Alloy, Drawn, Seamless, 6061 (Stabilized: Sep 2015) standard by SAE International, 09/14/2015
SAE AS151701C STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A standard by SAE International, 09/14/2015
SAE AIR5771 The Measurement of Engine Thrust in an Altitude Test Facility standard by SAE International, 09/14/2015