SAE AMS2259F Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels standard by SAE International, 10/25/2017
SAE AS5857A Gland Design, O-ring and Other Elastomeric Seals, Static Applications standard by SAE International, 10/25/2017
SAE AMS4350N Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As Extruded standard by SAE International, 10/25/2017
SAE AMS6372N Steel, Mechanical Tubing 0.95Cr â 0.20Mo (0.33 â 0.38C) (SAE 4135) standard by SAE International, 10/25/2017
SAE AMS3218D Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 standard by SAE International, 10/23/2017
SAE AMS5122K Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper (Stabilized: Oct 2017) standard by SAE International, 10/20/2017
SAE AMS5031G Welding Electrodes, Covered, Steel 0.07 - 0.15C (Stabilized: Oct 2017) standard by SAE International, 10/20/2017
SAE AMS3217/8A Test Slabs, Fluoroelastomer (FKM), 70â80 Hardness, for Improved Gas Turbine Engine Oil Compatibility standard by SAE International, 10/18/2017
SAE ARP5758A Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells standard by SAE International, 10/04/2017
SAE ARP 86B Heater, Airplane, Engine Exhaust Gas to Air Heat Exchanger Type ( Reaffirmed: Sep 1992 Jun 2002 Dec 2007 ) standard by SAE International, 02/01/1952
SAE AIR13A FINAL REPORT ON COLD STARTING OF RECIPROCATING AIRCRAFT ENGINES standard by SAE International, 10/01/1951
SAE AS100016 Lockwire, Brass standard by SAE International, 08/01/1951