SAE AS7283B Gaskets, Type XX Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced Controlled Performance standard by SAE International, 11/19/2012
SAE AS5133 Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements standard by SAE International, 11/19/2012
SAE AS7470C Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded standard by SAE International, 11/19/2012
SAE AMS5659/H1025 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr 4.5Ni 0.30Cb (Nb) 3.5Cu Consumable Remelted, Solution and Precipitation Heat Treated (H1025) standard by SAE International, 11/19/2012
SAE ARP4105C Abbreviations, Acronyms, and Terms for Use on the Flight Deck standard by SAE International, 11/19/2012
SAE AS4667A ELBOW ASSEMBLY, 45°, RETAINED NUT, SHORT FLARELESS standard by SAE International, 11/19/2012
SAE AS4670A ELBOW ASSEMBLY, 90°, RETAINER NUT, SHORT FLARELESS standard by SAE International, 11/19/2012
SAE AS4675A TEE ASSEMBLY, RETAINED NUT ON SIDE, SHORT FLARELESS standard by SAE International, 11/19/2012
SAE AS6450A Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Other Fluid Systems standard by SAE International, 11/19/2012
SAE AS8879D Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter standard by SAE International, 11/19/2012
SAE AS9142B GASKET - METAL O-RING, .062 TUBE X .006 WALL, CRES - UNS S32100 standard by SAE International, 11/19/2012
SAE AS9141B GASKET - METAL O-RING, .035 TUBE X .006 WALL, CRES - UNS S32100 standard by SAE International, 11/19/2012