SAE AMS2259E Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels standard by SAE International, 10/02/2012
SAE AMSWWT700/4A Tube, Aluminum Alloy, Drawn, Seamless, 5052 standard by SAE International, 09/28/2012
SAE AMS6302J Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C) standard by SAE International, 09/28/2012
SAE AMSQQA200/6B Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded standard by SAE International, 09/28/2012
SAE AMS7731C Gold Wire and Ribbon 99.97Au Annealed standard by SAE International, 09/28/2012
SAE AMSL18331A Lead Alloy Pig standard by SAE International, 09/28/2012
SAE AMS7721C Lead Alloy Sheet and Extrusions 93Pb - 6.5Sb - 0.50Sn As Fabricated standard by SAE International, 09/28/2012
SAE AMS4805E Bearings, Sintered Metal Powder 89Cu - 10Sn Oil Impregnated standard by SAE International, 09/28/2012
SAE AMS4124E Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged standard by SAE International, 09/28/2012
SAE AMSWWT700/3A Tube, Aluminum Alloy, Drawn, Seamless, 2024 standard by SAE International, 09/28/2012
SAE AMSQQA200/5A Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and Wire, Extruded standard by SAE International, 09/28/2012
SAE AMSQQA225B Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For standard by SAE International, 09/28/2012