No products
SAE There are 12923 products.
-
SAE AMS5637H
SAE AMS5637H Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AMS5085H
SAE AMS5085H Steel Sheet, Strip, and Plate 0.48 - 0.55C (SAE 1050) Annealed standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AMS4040N
SAE AMS4040N Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O with 1 ¿% Alclad); Annealed standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AS5259/7
SAE AS5259/7 CRIMPING TOOL AND ACCESSORIES, DIES, WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AS85049/118C
SAE AS85049/118C CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, NON-SELF-LOCKING, CATEGORY 4B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AS5680A
SAE AS5680A Fuze Well Mechanical Interface standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AS81824/8
SAE AS81824/8 SPLICE, IN-LINE, ELECTRIC, CRIMP, NI/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (175 °C), 1 à 3 SEALANT OPENING standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AS39029/30B
SAE AS39029/30B CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS50151 AS345XX SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AS5653A
SAE AS5653A High Speed Network for MIL-STD-1760 standard by SAE International, 07/25/2012
$31.20 $78.00 -60%In Stock -
SAE AS4690C
SAE AS4690C FITTING, TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS AND SHORT FLARELESS standard by SAE International, 07/24/2012
$31.20 $78.00 -60%In Stock -
SAE AS4688B
SAE AS4688B FITTING, TEE, REDUCER, FLARELESS AND SHORT FLARELESS standard by SAE International, 07/24/2012
$31.20 $78.00 -60%In Stock -
SAE AS5466
SAE AS5466 Aerospace - General Requirements for Hydraulic Fuse - Quantity Measuring standard by SAE International, 07/24/2012
$31.20 $78.00 -60%In Stock
