SAE AS125551B RIVET â UNIVERSAL HEAD, MILD STEEL (Stabilized: Feb 2012) standard by SAE International, 02/23/2012
SAE MA4248A CAP ASSEMBLY, PROTECTIVE CLOSURE BEAM SEAL FITTING, LOW PRESSURE, METRIC standard by SAE International, 02/23/2012
SAE AS5259/6 CRIMPING TOOL AND ACCESSORIES, INSPECTION GAGES, FOR AS5259 DIES standard by SAE International, 02/23/2012
SAE AS6254 Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered) standard by SAE International, 02/23/2012
SAE J 2727 Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf standard by SAE International, 02/23/2012
SAE AMS4553C Brass, Seamless, Tubing 85Cu - 15Zn Annealed (061) standard by SAE International, 02/15/2012
SAE AMS4612J Brass, Naval, Bars and Rods 60.5Cu - 38.5Zn - 0.75Sn Hard Temper (H04) standard by SAE International, 02/15/2012
SAE AMS4616F Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved standard by SAE International, 02/15/2012
SAE AMS4712F Copper Alloy, Wire 65Cu - 35Zn Annealed (061) standard by SAE International, 02/15/2012
SAE AMS4827E Bearings, Leaded Bronze 80Cu - 10Pb - 10Sn Steel Back standard by SAE International, 02/15/2012
SAE AMS4842E Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast standard by SAE International, 02/15/2012
SAE AMS4343D Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged standard by SAE International, 02/15/2012