New product
standard by ASTM International, 10/01/2013
Warning: Last items in stock!
Availability date:
1.1This test method covers the laboratory determination of the viscosity of engine oils at 150C and 1.0106s1 using a viscometer having a slightly tapered rotor and stator called the Tapered Bearing Simulator (TBS) Viscometer.2
1.2The Newtonian calibration oils used to establish this test method range from approximately 1.2mPas to 7.7 mPas at 150C. The precision has only been determined for the viscosity range 1.47mPas to 5.09 mPas at 150C for the materials listed in the precision section.
1.3The non-Newtonian reference oil used to establish the shear rate of 1.0106s1 for this test method has a viscosity closely held to 3.55 mPas at 150C by using the absolute viscometry of the TBS.
1.4Manual, semi-automated, and fully automated TBS viscometers were used in developing the precision statement for this test method.
1.5Application to petroleum products such as base oils and formulated engine oils was determined in preparing the viscometric information for this test method.
1.6The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6.1This test method uses the milliPascalsecond (mPas) as the unit of viscosity. This unit is equivalent to the centipoise (cP).
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.